Pedal to the Metal...

Been working on the throttle.  The Daylight's throttle is in the smokebox.  I used an ANSI fire rated SS ball valve for the throttle to handle the high heat.  I hope it works.

Needed to make several parts by hand which took a bit of time.  Here I made modifications to the smokebox for the throttle. 

This part is used half way and is connected to the boiler.

Then I made the notches for the throttle lever...

It made it large (and strong) enough so I can get my hand around it and use some force without bending anything.  Definitely NOT to scale.

This is the mounting bracket I made for the throttle lever.

Here is the whole throttle setup with linkage and all.  I have a temporary brass rod on the rear portion to be replaced with SS as soon as I get it.